1.
Locate 75-3/4" long 1x4 white pine corner trim boards.
These boards are not used for trim, you will use vinyl
outside corners instead.
2.
Cut several boards into smaller pieces and install as filler
on the rear gable. Install the 1x4 flush with the top of the
gable frame. 1x6 gable trim will be installed over the 1x4
later. Do not install 1x4 boards on the other gable.
1x4 Board
Cut to Fit
2.
Install gable siding using 6d galv. nails across
the top of the gable frame. Use 8d galv. nails
along the bottom edge.
Step 3A
Install Siding on Gables
Step 3B
Install 1x4 Filler on Rear Gable
1.
Select one of the gable frames, Turn the gable over letting the bottom plate overhang
the floor so the gable lays flat.
Install Siding on Ends
Siding Extends Below
Bottom Plate
3.
Install siding on the other gable frame.
Install Siding Flush
