24"
Inside of Building
Detail 'B'
Right Gable
21-3/8"
Right Side Wall
Back Wall
Right Gable
1x4 T
rim
Siding Overlaps Side Wall Trim
Step 10 Install Gable on Right Side Wall
Step 11A Install Trusses
2.
Using 1-1/2" hanger nails, install metal hangers to the 2x4 tie plate on the front wall only.
The opening should line up with the 'X' mark, the bottom of the opening, flush with the 2x4
tie plate.See Detail 'B'.
1.
Indicate with 'X' marks where the trusses will be located on the front wall. Measure from the
inside face of the gable to the first 'X' mark. Important: When marking the back wall, place
the 'X' mark on the same side of the line so your trusses are parallel when they are installed.
1.
Install the gable on the right side wall. The
gable frame will butt against the back wall
siding and extend over the front wall. Gable
siding MUST extend over the 1x4 trim on the
side wall. Secure gable to wall by nailing
through the gable blocks with 10d sinkers.
2.
Nail siding along the 1x4 trim board with 6d
galv. nails.
3.
Install the left gable.
