flush
1.
Install a gable on the rear wall. The gable
siding will extend over the 1x4 trim on the
lower wall. NOT behind the trim!
Secure gable to wall by nailing through the
gable plate with 10d sinkers. Nail siding along
the 1x4 trim board with 8d galv. nails.
3.
Install trim on the front wall of the building.
Step 11 Install Rear Gable
Step 10 Install Rear Trim
Important: Bottom edge of siding extends
over 1x4 trim. Paint this edge.
Side
Wall
Flush Across Top
1x4 Trim
1x4 - 87 3/4" Corner Trim
1.
Install 1x4-87 3/4" corner trim boards to the rear wall. Install trim flush with the 2x4 top
plate and flush with the siding on the sidewalls. Use 8d galv. nails, spaced 12" apart.
2.
Cut 1x4-6' trim boards to fit between the corner trim boards.
Top Plate
Rear
Wall
2.
Install gable on the front wall.
