3.
Select the 12' back wall assembled in Step 2. Butt the 45" wall frame against the wall with
siding. DO NOT nail these frames together so they can be separated later.
4.
Install a siding panel on the 45" frame. Cut panel flush with the end of the wall frame. DO NOT
nail along the long edge of siding that overlaps the 12' wall frame. You can nail this edge after
the wall panels are installed. Two separate walls are easier to handle when erecting kit.
1.
Locate (2) two 45" long 2x4s and (3) three 2x4-72" wall studs.
2.
Install (2) two 2x4-72" wall studs between wall plates at each end. Install (1) one stud in the
center of the wall frame.
Do Not Nail Along This Edge
12' Wall Panel from Step 2
45" Wall Panel
Step 3
Assemble Back Wall Continued
45" Wall Plate
Siding Extending 3/4"
Below Plate
72" Wall Stud
