48" x 72"
48" x 72"
48" x 48"
2.
Install 1x4-6' fascia in the center of the building.
3.
Cut to fit and install a 1x4-4' fascia at the right end of the building.
1.
Starting at the front left of the building, install a 1x4-6' white pine fascia board flush with
the face of the siding on the left gable. See Detail 'E'. Install the fascia so the bottom edge
of the roof sheathing will rest on the edge of the 1x4. Use a straight edge to align the 1x4
boards with the top of the trusses. Install fascia with 8d galv. nails.
Step 17 Install 1x4 Fascia & Roof Sheathing
1x4 -6' Fascia Board
4.
Install roof sheathing per layout below. Make sure the trusses are plumb and the roof sheathing
meet at the center of the truss. Use 7d sinkers spaced 12" apart. The top row of roof sheathing
will be about 1" below the ridge to allow for ventilation.
5.
Repeat on back of building to install fascia and roof sheathing.
36-1/2" x
48" Panel
36-1/2" x 72"
36-1/2" x 72"
1x4 Fascia
2x4 Truss
Roof Sheathing
1" Below Top
Straight Edge
2x4 Tie Plate
2x4 Soffit Block
Nail Fascia to
2x4 Block
Detail 'E'
