BEST ACCESS SYSTEMS 1E Series, Руководство по обслуживанию, Страница: 59 / 96

Service and Maintenance
E Series Service Manual 5–9
To reinstall the cam:
1. If installing a new cam , use the cylinder cam testing tool
( page 2–14 ) to make sure the cam will function properly when
installed in the door.
2. Refer to Figure 5.10 and assemble the following parts onto the cam
assembly tool:
■
two throw pins
■
throw plug
■
stamped head
■
cylinder.
3. Position the cam on the back of the cylinder so that the throw pins
go through the two cam holes.
4. Using a ballpeen hammer, hit around the edges of the two throw
pins until the ends of the throw pins are level with the surface of the
cam.
Figure 5.10 Reinstalling the cam
Cam
Cylinder
Cam assembly tool
Stamped head
Throw pins
Throw plug