BeSense X32_ZWAVE, Руководство пользователя, Страница: 9 / 12

You should now see this device type in your list of Device Handlers
How To assign a custom DEVICE HANDLER to my zwave device
Simply exclude the device if you had included it prior to installing the new device
handler. Then add the device to your SmartThings hub by clicking on Add thing > +
Connect New Device in your app. Press and release the tamper switch three times on
the sensor quickly.
Remember to keep the device within 3 feet away from your hub during inclusion — the
device should be automatically discovered as the BeSense Motion sensor. Then, leave
the sensor by the hub for a few hours so it can fully configure.
And that should be it! I hope this was helpful in simplifying the process behind custom
device handlers. Feel free to contact us if you have any question.
info@besense-iot.com