-7-
6. Measurement
※
The bargraph shows the major level
indication, the LCD also shows the
digital reading.
Before proceeding with measurement,
read the safety note.
WARNING!
Each test 600V voltage above can only
last for 1 minute. The interval between
each test should be at least 5 minutes.
●
How to turn on the voltage/continuity
tester
1. When the battery is good, to connect
the test probes with a resistance under
200kΩ or use the red (L2+) test probe
to touch the black (L1) test probe
directly.
2. Measure the voltage over 6V when the
battery exist inside, or measure the
voltage over 20V without battery
