-8-
3. When the battery is good, to connect
the any one of test probes with a Phase
Lin Point.
● How to turn off the voltage/continuity
tester
Separate the probes and do not touch
any device, then the LCD will show “O.L.”
(resistance over 2000Ω) and it will turn
off after 10 seconds later.
● VOLTAGE TEST
Performing a voltage test:
Connect the red (L2+) test probe and the
black (L1) test lead to the circuit or device
under test.
The LCD will display the polarity, the
voltage value and the bar indication.
The LCD will display the frequency when
the input voltage is AC.
● PHASE / NEUTRAL IDENTIFICATION
Identify Phase or Neutral:
Hold the tester's body, then connect the
red (L2+) (or Black (L1)) test lead to the
circuit to be tested (such as a wall outlet).
