-
BESANTEK
10.8 Insulation Resistance Measurement @ 500Vdc
Always check for voltage
���,�
before testing and measuring
vo.n,
........
..
�
on a circuit. This instrument is
""::i-
,
.:
�
v
a.umtv
Q�,OiW
intended for measuring Lown
�
t-
and Insulation resistance on
lll!!lllllft::
-
�
J
ill
un-energized circuits only.
,
·
\,'i>,.
-
Use the procedure explained
�
'�"0
1
1
at points 7.2, 7.3, 7.4.
00
._.
t
00�11��
:
�
Check the test leads and fuse
·�
1
--····
resistance by zeroing the test leads and fuse as per
the 7.6 procedure.
Connect the test leads to the circuit to be measured
and wait for a few seconds. The instrument will
automatically discharge any remaining energy which
could be present on the circuit, and will check for
voltage at the same time.
Once you are sure that the circuit to be tested is
not energized, then press the button for a short test
duration or press and turn the button for a long test.
Once you end the test, allow a few seconds for the
instrument to automatically discharge the circuit.
-15-
