-
BESANTEK
10.Functions
10.1 Battery Check
Turn the function selector to Batt. Check. This
function has a load which draw about 205mA when
test is performed, and therefore it is doing a worst
case battery test.
Then, press the test button, the pointer should be in
the Bat. Good area. During the test, the bat. OK led
( on line battery check ) must lit if the pointer is in the
Bat. Good area.
10.2 DC Warning
The DC warning buzzer will beep continuously when
DC voltage is higher than 30Vdc on the test probes
and the test button is Not pressed.
The neon light "circuit live" will lit when the voltage
on the test probes is higher than 90Vdc and the test
button is not pressed.
-10-
