-8-
7. Preparation for Measurement
Before testing Always Check the Following.
- There is no visual damage to the Instrument or Test
leads.
- Test lead Continuity with a continuity meter.
8. Battery Replacement
Your Digital RCD Tester's batteries are situated under
the tester.
Disconnect the Test leads from the Instrument,
remove the battery cover and the batteries.
Replace with six 1.5V AA alkaline batteries, taking
care to observe correct polarity.
Replace the Battery cover.
9. Fuse Replacement
Open the fuse compartment lid. Remove the bad
fuse, and replace with the new one.
Replace the fuse compartment lid.
Fuse: 1A
/ 500V, 5 × 20mm
