6
1.8 Buttons
Buttons
Introduction for buttons operation
Click to turn on the instrument and press long for 3 seconds to turn it off.
Automatic shutdown in 15 minutes.
Click to enter into the logging mode, click again to exit the LOG(auto-recording) mode.
Click to enter into the setup mode, click again to exit the current mode and save the
settings.
1
、℃
/
℉
switching button
，
usually
℃，
switch
℃
/
℉，℉
lighting
，
OK to enter
into the next setting mode
2
、
SETUP DEL MEM
：
show DIS in the LCD corner means CAN’T
，
switch
，
show En and press OK to delete the manual-recording data
3
、
SETUP DEL LOG
：
show DIS in the LCD corner means CAN’T
，
switch
，
show En and press OK to delete auto-recording data
4
、
SETUP TYPE
：
lighting from K
，
moving on one by one
，
OK key to confirm
the sensor type.
Setup switch button during the setup mode
Backlight button during the normal working mode
Direction button during the setup mode
Maximum/minimum data checking button during the normal working mode
Direction button during the setup mode
Button for checking the previous manual-recording data during normal working status.
Direction button during the setup mode
Button for checking the manual-recording data during normal working status, total in 88
(capacity)
Direction button during the setup mode
Holding the fixed measuring data status during the normal working mode
