5
Too high
Too low
Correct
Click!
!
Height adjustment of harness system
Height can be adjusted by releasing
the height adjustment device on the back of
the iZi Combi ISOfix, place it in the correct
position and clicking it in. Twist and pull the
shoulder belts on the front side of the seat
until the belts are adjusted into the correct
position. Check the webbing has not become
twisted.
Position of the shoulder strap:
Check that the shoulder strap
slots are levelled with your child’s
shoulders.
You must adjust the shoulder belt of the harness to the
correct position for your child before installing the seat, as it
cannot be adjusted in the car. The harness must be fastened
and adjusted correctly at all times. Children should be
encouraged to remain within the harness system.
b
c
a
Lay the shoulder straps over the sides of the
iZi Combi ISOfix, before your child is seated.
Then place the straps over the shoulders of
your child and close the buckle; Click!
e
Position the pads on the shoulder straps over
the child’s shoulders. Place one hand on the
front of the car seat and pull the harness
adjustment strap towards you. Continue pulling
until the harness is a comfortable but firm fit.
f
Tighten the belts by pulling them towards
you and in this way straighten them out
inside the construction.
d
Pull out the shoulder belts while pressing the
button on the harness adjustment mechanism.
