BERTSCHAT HEATED MITTENS PRO - DUAL HEATING, Руководство пользователя

Страница: 3 / 45

3
USER MANUAL MITTENS DOUBLE HEATING
BEFORE FIRST USE
The batteries are not fully charged and must therefore be charged before first use for 8 hours minimum, regardless
of the colour of the indicator LED. To get started insert the charger plugs in the charging ports of the batteries. Fully
charging the batteries activates them, thus allowing the full capacity to be accessed. The LED on the charger lights
up in red during charging and turns green once the battery is fully charged. Finally, remove the batteries from the
charger, place them in the appropriate pockets in the mittens and connect them to the plugs.
SWITCHING ON THE HEATING
The heating is switched on by pressing the black silicon buttons on which the hands are displayed. The first button
controls the heating on the back on the hand while the second one controls the palm. This allows both sides of the
hand to be heated independently or at various levels of intensity.
TEMPERATURE SETTINGS
The temperature can be set by pressing the silicon buttons. When in use the buttons light up in one of the below
colours indicating which setting is active:
Colour LED Heating position
Orange Medium position
Red Highest position
White Lowest position
LED does not
light up
Heating function switched off