If everything is correct, take a few lef-
tover wood pieces from the package
and screw them to the foundation be-
ams in two corners. This prevents the
frame from moving.
Now check again to make sure all
foundation beams are screwed to the
fi
rst layer of timbers. Screw the two
side parts twice from the centre to the
foundation beam underneath.
Take a plank for the front and back, and
then a plank for the left and right-hand
side, continuing to alternate in this fa-
shion. Carefully assemble the pieces,
ensuring they are properly interlocked
using the provided block of wood. Al-
ways check the number of assembled
plank rows against the number in the
drawing to prevent errors.
Door installation
Insert the door into the summer house
when you get to the third plank row.
Take the door and remove the trans-
port securing device at the bottom of
the frame by unscrewing it. Set the
door into the frame from above the
three plank rows and insert it carefully
and without tilting.
Assemble the remaining plank rows as
described above. At the door, simply
slide the planks in the door frame.
Also count the plank rows in the dra-
wing for the window. Before inserting
the window remove the transport se-
curing device as describe above. Let
it slide into the opening without tilting.
S
TEP
3
Setting up the wall elements
4
We are not responsible for damages during assembly!
