EN - 49
5 CLEANING AND
MAINTENANCE
Disconnect the unit from the power
supply before cleaning.
Do not wash your appliance by
pouring water on it.
Do not use abrasive products,
detergents or soaps for cleaning the
appliance. After washing, rinse with clean
water and dry carefully. When you have
finished cleaning, reconnect the plug to the
mains supply with dry hands.
•
Make sure that no water enters the lamp
housing and other electrical components.
•
The appliance should be cleaned
regularly using a solution of bicarbonate
of soda and lukewarm water.
•
Clean the accessories separately by
hand with soap and water. Do not wash
accessories in a dish washer.
•
Clean the condenser with a brush at least
twice a year. This will help you to save on
energy costs and increase productivity.
The power supply must be
disconnected during cleaning.
5.1 Defrosting
•
Your appliance performs automatic
defrosting. The water formed as a
result of defrosting passes through
the water collection spout, flows into
the vaporisation container behind your
appliance and evaporates there.
•
Make sure you have disconnected the
plug of your appliance before cleaning
the vaporisation container.
•
Remove the vaporisation container from
its position by removing the screws as
indicated. Clean it with soapy water at
specific time intervals. This will prevent
odours from forming.
5.2 Replacing LED Lighting
Depending on the model, one or two LED
strip in the cooler is used to illuminate the
interior of your appliance.
To replace any of the LEDs, please
contact the nearest Authorised Service
Centre.
Note:
The numbers and location of the LED
strips may change according to the model.
!
Some versions may not include cooler
illumination.
LED strip
(In some models)
Left / Right side LED strip
(In some models)
Содержание REF603BBNPVC
Страница 151: ...SE 151 ...
Страница 152: ...52285357 ...