background image

 

2

 

IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE. 
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 
OBSERVE ALL GOVERNING CODES AND ORDINANCES. 

 

WARNING:  If  the  information  in  this  manual  is  not  followed  exactly,  a  fire  or 
explosion may result causing property damage, personal injury or death. 
Do not store or use gasoline or other flammable vapors and liquid in the vicinity of 
this or any other appliance. 
WHAT TO DO IF YOU SMELL GAS 
     - Do not try  to light any appliance. 
     - Do not touch any electrical switch. 
     - Do not use any phone in your building. 
     - Immediately call your gas supplier from a neighbor’s phone. Follow   
       the gas supplier’s instructions. 
     - If you cannot reach your gas suppliers, call the fire department. 
Installation  and  service  must  be  performed  by  a  qualified  installer,  service  agency 
or the gas supplier. 

Read this instruction booklet before installing and using the appliance. 

 

This appliance is marked according to the European directive 2012/19/EU on Waste 
Electrical and Electronic Equipment (WEEE). 
This guideline is the frame of a European-wide validity of return and recycling on Waste 
Electrical and Electronic Equipment.

 

 

The manufacturer will not be responsible for any damage to property or to persons caused by 
incorrect installation or improper use of the appliance. 

The manufacturer reserves the right to make changes to its products when considered necessary and useful, 
without affecting the essential safety and operating characteristics. 

This appliance has been designed for non-professional, domestic use only. 
 

INFORMATION FOR THE INSTALLER 

The  installation,  all  regulations,  changes  and  maintenance  referred  to  in  this  part  must  only  be 
carried out by qualified staff.  
A wrong installation can cause damage to persons, animals or things which the manufacturer cannot 
be held responsible for. 
The  safety  and  automatic  regulation  devices  on  the  appliances  can  only  ever  be  changed  by  the 
manufacturer or by the supplier which has been authorised to do so. 
 

Inserting the hotplate

 

After  having  removed  the  various  loose  parts  from  the  internal  and  external  packing,  make  sure  that  the 
hotplate in not damaged and is suitable for the specific gas usage. The gas type label is on the underside of 
the hotplate base. 
In case of doubt, do not use the appliance and contact skilled personnel. 
Keep all the packing parts (polystyrene foam, cardboard, staples, etc.) away from children. 
Consider the critical dimensions of the appliance, before making an opening in the top surface of the bench 
top. (relative measurements as per Fig 1- 2). 
 
 

 

Содержание PM36500X













Отзывы: