Bertazzoni PE244CER, Инструкция по эксплуатации и обслуживанию

Страница: 10 / 28

10
EXTENDABLE DOUBLE COOKING
ZONE
The cooktop has extendable cooking
zones that can increase the cooking area.
In this way, the user can utilize pans with
different diameters.
Press the key to activate the second
circuit of the cooking zone.
Then, use the Slider Bar (C zone)
to adjust the power level.
To disable this function: touch the Double
cooking zone key (B zone) again.
RESIDUAL HEAT
If the temperature of the cooking zone is
still high after it has been switched off,
the relative indicator will be on (residual
heat).
The signal will only switch off when the
surface temperature has fallen to a safe
level.
TIMER
This function allows establishing the
time (from 1 to 99 minutes), and can be
modified at any time.
The minute minder is switched on by
touching the Timer or key (G zone) .
If the key is touched, a beep sounds
and the timer display (H zone) shows “45”.
The timer indicator of the timer display
blinks to indicate the time selection status.
If key is touched, a beep sounds and
the timer displays shows “00”, and the
timer indicator display blinks to indicate
the time selection status.
To disable the operation of the timer,
select a timer value of “00”, using the
key, or switch off the timer by touching
the Timer and Keys simultaneously.
Select a Cooking zone minute minder:
To select a minute minder associated to a
cooking zone:
- Select the desired cooking zone
- Touch the Timer or keys (G zone)
to switch on the Timer; the cooking zone
timed led blinks when a cooking zone
minder is selected. If the cooking zone is
switched off, the corresponding cooking
zone minute minder is switched off.
Select a independent minute minder:
If no cooking zone is selected, press the
timer or keys (G zone) to select
the indipendent minute minder.
The indipendent minute minder can
be selected even if the cooktop is off:
touching the timer or key to switch on
the timer. The timer on led blinks when the
independent minute minder is selected. If
the cooktop is off, the independet minute
minder is not switched off.
Minute Minder Time Visualization:
If more than one minute minder is
selected, then the timer displays show the
count down of the timer whose remaining
time is the lowest. The active minute
minder led blinks. If no cooking zone is
selected, touch the timer or key
to change the indipendent minute minder
time. The timer display (H zone) shows
the selected time, and the timer led blinks.
If a timed cooking zone is selected, the
timer display show the selected timer
time, and the timed cooking zone led
blinks (L zone) .
Selecting/changing the time:
If the or keys associated with the
timer are held down, the value increases/
decreases automatically. After 10
increase/ decrease increment/decrement
increases in speed. This makes possible
to reach the desired timer setting
more quickly. The led light timer blinks
indicating that the time selection status.
The selection time is confirmed 5 seconds
after the last touch over the timer or
keys. When the selection time finishes,
a beep sounds to indicate that the
countdown has initiated.
Starting the timer countdown:
If no key is touched in 5 seconds after
the last operation over the timer or
k key, the timer selection will switch
off. In this 5 sec, if any cooking zone is
selected the timer selection will switched
on and the timer will be switched on.