Bertazzoni KTI Series, Инструкция по установке и эксплуатации

Страница: 15 / 60

15
4
If you need to adjust the height of the frame, proceed as follows:
• Unfasten the metric screws joining the two columns, located at the sides of the frame
(1,2,3,4,5,6).
• Adjust the frame to the height required, then refit all the screws removed as above.
NOTE : The chimney structure can reduce down to a 27 " minimum height. To
reduce the height, the middle section of the support structure needs to be removed.
Out of the box, the minimum chimney length is 32 ". Insure the the installation
process outlined in the U&C is followed and there is sufficient stability with the
middle section removed.
REMOVING THE MIDDLE TRESTLE COMPONENT
1 4 . REMOVING THE MIDDLE TRESTLE COMPONENT
NOTE
: The chimney structure can reduce down to a 27 " minimum height. To reduce the height,
the middle section of the support structure needs to be removed.
Out of the box, the minimum chimney length is 32 ".
Insure the the installation process outlined in the U&C is followed and there is sufficient stability with the
middle section removed.