Bertazzoni KOTR30MXE, Руководство по установке

Страница: 9 / 20

E 9
Connecting Ductwork
• Extend the house duct down to connect to the exhaust
adapter. Seal exhaust duct joints using duct tape. See
Figure 25.
House Duct
Figure 25
How to Replace the Charcoal filter
1. Unplug the oven or turn off the power at the main power
supply.
2. Remove the grille air mounting 3 screws and open the door.
See Figure 26.
Figure 26
3. Slide the grille air to the left, then pull it straight out.
4. Push the charcoal filter backward and remove it.
5. Slide a new charcoal filter into place. The filter should rest
at the angle. See Figure 27.
Charcoal Filter
Grille Air
Figure 27
6. Replace the grille air and 3 screws and close the door.
7. Plug the oven in or turn on the power at the main power
supply.
CHECK LIST FOR OPERATION
1 Make sure the unit has been installed according to all of
the Installation Instructions, the Top Cabinet Template and
Wall Template.
2. Remove all packing material from the oven.
3. Plug in the power cord.
4. Read the Use & Care Manual.
5. Keep the Installation Instructions for the local electrical
inspector’s use.
ACCESSORIES
Check with your dealer or order directly from Bertazzoni.
CHARCOAL FILTER (CFOR3). Filter is used when hood
exhaust is recirculated only.