12
Cleaning the burner flame caps:
Since the flame caps are resting on the burner, to clean them just remove them from their seat and wash them with
soapy water. After they have been thoroughly dried and having checked that the holes are not clogged, they can be
replaced in their proper position.
Cleaning the inner glass door:
Clean the glass with warm soapy water using a sponge. A spatula can be used to
remove burner fat if used gently.
ATTENTION:
while cleaning the door make sure to avoid any spillage in the venting holes on the top part of the door. To
clean inside the door it is necessary to disassemble the door through a service engineer.
ATTENTION:
for further details about cleaning of the appliance, please contact your applliance retailer.
AFTER-SALES TECHNICAL SERVICE AND SPARE PARTS
Before leaving the factory, this appliance was tested and calibrated by skilled and qualified personnel.
Any repairs or calibration that may become necessary after leaving the factory should be performed by skilled personnel.
For this reason we advise the customer to contact the Dealer that sold the appliance or the nearest Service Centre,
providing them with information about the type of appliance and the type of problem that has occurred. If defective parts
must be replaced, it is recommended to replace them with original spare parts that are available only in our technical
Service Centres and authorised dealers.
Fig. 1
Fig. 3 Fig. 4 Fig. 5
Содержание FREE-STANDING COOKERS 60x60
Страница 13: ...13 Fig 6 Fig 7 Fig 8 Fig 9 Fig 10 Fig 11 ...
Страница 14: ...14 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 Fig 17 T Fig 18 Fig 19 Fig 19 A ...
Страница 15: ...15 Fig 19B Fig 20 Fig 21 Fig 22 Fig 23 Fig 24 Fig 25 Fig 26 Fig 27 Fig 28 ...
Страница 16: ...16 Fig 29 Fig 30 Fig 31 Fig 32 Fig 33 Cod 310294 ...
