18
example, oven vent openings and surfaces near these openings, oven doors, oven
glass window.
USING THE LCD DISPLAY
At power on, the contact is opened. The display and AUTO symbol flashes and
time of day starts from 0:00. Power on state with flashing daytime remains until
time of day is set
SETTING TIME
Press PLUS (+) and MINUS(-) button simultaneously. At Power On, also MODE
button is possible. Time of day can be set with PLUS or MINUS, while the colon
between hours and minutes is flashing. When PLUS or MINUS is continually hold,
the quick setting mode starts. If daytime setting mode is selected while an
automatic program is active, the automatic program is cancelled.
TIMER
The purpose of the timer is just of a sound signal, which can be set for a max time of
23h59min
.
once elapsed the set time, th
e
Bell symbol turns off and a sound signal is
heard
;
this sound set off automatically in 7min, or you can stop it by pressing any key
of the programmer
.
To set the timer press the M key for 2 seconds, or anyway just to
see the Bell symbol blinking. Set the timer by using the + or - keys. Release the + or
- key when you have matched your des
i
red tim
e
. In a few seconds the current time
appears on the disp
l
ay together with the symbol
.
The countdown
s
tarts
i
mmediately
from now on.
SEMI-AUTOMATIC COOKING
(only for upper cavity)
Cooking time
:
Once having selected a coking function and set the desired
temperature, press the M key for a 2 seconds time to access the programming
mode. The BELL symbo
l
appears. Release and press again the M key. On the
display, the A symbol starts blinking and the " dur " writing appears on the display,
then it changes to O' 00
.
Set the cooking time with the - or + keys. (max available
time: 10h)
.
The selected time is automatically processed by the programmer in a few
seconds, or you can also touch the M key many times just to see again the current
time
.
The AUTO and POT symbols will be on the display
.
Once the set cooking time is
finished, a sound will be heard and the oven automatically switches off
.
Please see
the fo
l
lowing paragraphs about how to disable the sound alarm and restarting the
oven
.
END OF COOKING
(only for upper cavity)
Once having selected a cooking function and set the desired temperature, touch the
M key to access the programming mode for at least 2 sec. the ) symbol switches on.
Release and touch again the M key.
On the display the AUTO symbol starts blinking and the writing
"
dur
"
appears. Touch
again the M key. On the display the writing "End" appears. The last one changes few
seconds after with the symbol 0· 00.
Set the end of cooking time with the keys - or +. (maximum available time
:
10hOOm).
The selected time is automatically processed by the programmer in a few seconds,
or you can also touch the M key many times just to see again the current time
.
The cooking immediately starts, while on the programmer display the current time is
shown again in a few s
e
conds. The AUTO and POT symbols will be on the display
.
Once the set end of cooking time is finished, a sound will be heard and the oven
automatically switches off. Please see the follo
w
ing paragraphs about how to disable
the sound a
l
arm and r
e
starting th
e
oven
.
AUTOMATIC CCOKING
(only for upper cavity)
Set a cooking time following the instructions on the cooking time paragraph, then set
the end of cooking time fol
l
owing the instructions on the previous paragraph. (Max
available end of cooking time 24h). The oven automatically switches on at a
determined time which is the differ
e
nce between the end of cooking time and the
cooking time.
During the wait
i
ng time before cooking, which goes from the oven start to the
heating, on the display appears the A symbol to show that an automatic program is
on and the current time. The oven on is marked by the POT symbol
.
Once the set
end of cooking time is finished, a sound
wi
ll be heard and the oven automatically
switches off
.
Please see the following paragraphs about how to disable the alarm and restarting
the oven
.
