Bertazzoni FD30CON, Инструкция по установке, использованию и уходу

Страница: 42 / 49

42
TROUBLESHOOTING GUIDE
OVEN PROBLEM POSSIBLE CAUSES AND/OR REMEDY
Oven does not function Range is not connected to electrical power. Ask a professional to
check power circuit breaker, wiring and fuses.
Self-clean cycle does not activate Door is not shut tight and door latch cannot lock
Door does not open Oven is still in self-clean mode. Door latch will release when safe
temperature is reached.
Oven light does not work Light bulb is burned out.
Oven is not connected to power.
Clean cycle is on.
Oven door is locked and will not
release after cooling Turn the oven off at the circuit breaker and wait 5 minutes. Turn
breaker back on. The oven should reset itself and will be operable.
Oven is not heating
Check the circuit breaker or fuse box to your house.
Make sure there is proper electrical power to the oven.
Make sure the oven temperature has been selected.
Oven light is not working properly Replace or reinsert the light bulb if loose or defective.
Oven light stays on Check for obstruction in oven door. Check to see if hinge is bent.
Cannot remove light cover
There may be debris/spillage around the lens cover. Wipe lens cover
area with a clean dry towel prior to attempting to remove the lens
cover.
One cavity is not working
Other oven is in self cleaning mode this is normal, wait for
termination of the cleaning cycle
One cavity is not working but
other cavity is working regularly a problem in the involved cavity has occurred. Contact after sale
service with the indication of the error message shown on the display.
Specific error messages may appear in case of malfunction. Call after sale service and provide the
information that appear in the display for a quick and accurate diagnosis.