Bertazzoni DW24 Скачать руководство пользователя страница 16

Страница: 16 / 18

Troubleshooting

Etching

Using too much detergent

Use less detergent if you have soft water

Lower the inlet water temperature

Problem

Dishwasher won't start

Dishwasher beeps at the end of
the cycle

Rinse Aid light on

Dishwasher operates too long

Dishes are not clean enough

Dishes not drying enough

Spots and filming on dishes

Possible cause

Power supply or power line is not connected

LED screen shows “Lsb”

The dishwasher is connected to cold water

Water pressure is temporarily low

Detergent dispenser is empty

Water hardness is too high

Dishwasher won't start

Child Lock activated
(selected models)

It indicates the wash cycle finished, the
dishwasher will beep

The cycle time will vary due to the soil

The sanitize option is selected

The inlet water temperature is low

Dishes are loaded too close together
improper use of detergent

The selected cycle is not suitable for food

soil condition

ay arms is blocked by some items

Improper loading of dishes

The cycle you chose did not included the
drying

Improper loading of dishes

Old rinse aid is used

Rinse dispenser empty

Add rinse aid

Check the dishwasher, make sure it is properly
connected to the hot water supply

Fill rinse aid dispenser or increase the amount of
rinse aid.

For extremely hard water install a water softener

Deactivate the child lock, refer to child lock
section in this manual

When heavy soil is detected, the auto, normal,
pots&pan cycle will automatically increase the
cycle time

When sanitize option is selected, the cycle time
will be increase to meet the sanitized temperature
request

Load the dishes again as the manual
Add detergent depending on the water hardness
and the cycle you chose. Use fresh detergent

Make sure the dishwasher is connected to the hot
water supply
Try not use your dishwasher when hot water is
being used elsewhere in the house

Choose an

ther cycle for longer washing time

Make sure the sp

ay arm is rotated freely

Load the dishes again as the manual instructs.

Choose the proper cycle with drying

Load the dishes again as the manual indicates

Use fresh rinse aid

Add rinse aid to the dispenser

Delay Start option has been selected

Check and connect the power supply

Shut the door completely make sure it is latched

Refer to Delay Start section in this manual to reset

Use you dishwasher when the water pressure is
normal

Solution

The inlet water temperature exceeds 158

℉

Содержание DW24



















Результаты поиска

Содержание DW24

Отзывы:

Похожие инструкции для DW24

Бренды по названию

Популярные бренды

Bertazzoni DW24, Инструкция по использованию и уходу

Результаты поиска

Содержание DW24

Отзывы:

Похожие инструкции для DW24

Бренды по названию

Популярные бренды