
1 8
Cleaning the Water Pump Impeller
Sometimes the impeller (labelled “B” in the diagram below) will need to
be cleaned. To service this part remove the impeller cover (labelled part
“A” in the diagram below) and then remove the impeller from the Water
Pump. Clean the impeller and impeller cover under running water until
any debris is cleared from both parts.
Decrease Water Pump Power
Turn the circular switch on the front of the lever
clockwise to decrease the power of the Water Pump
Increase Water Pump Power
Turn the circular switch on the front of the lever
counterclockwise to increase the power of the Water
Pump
Adjusting water pump power
If you find that the height of the water from the Fountain Spouts is too
high, you can adjust the power of the Water Pump to decrease the
Fountain Spouts’ output to your preference.
B
A