1 7
Recharging Your Fountain's Battery
Before proceeding, please read Warnings and Important Information on
page 1 .
Plug the battery charger into an electrical
wall outlet.
Plug the cord running from the battery
charger to the black labeled receptor on the
rechargeable battery. While the battery is
charging, the light on the top of the battery
will blink.
Charge battery for 1 2-1 4 hours or until the
red light on the top of the battery stops
blinking.
When the battery is fully charged, the light
on the top of the battery will stop blinking
and the light will be solid. At this point, you
can remove the battery from the charger
and plug the battery into your fountain.
Watch how to do this online!
See an online tutorial at: http://bit.ly/pump-tut
Cleaning the Water Pump
Remove the front of the water pump by grabbing
sides of front and pulling off of the unit.
Pull the two Water Pump filters from their locations
inside the Water Pump.
After you have removed the filters from the Water
Pump, clean the filters under running water until all
debris has been cleared from the filters.