Bernini Calcata Скачать руководство пользователя страница 23

Remember if you need help contact Customer Care: 1+ (619) 449-2392

|19

PROBLEM

SOLUTION

Fountain Is Not Work-

ing or Suddenly Stops

Check that all connections are properly connected.

Pump suddenly stops: Check pump is free of debris, kinks or obstructions. See 

Troubleshooting section. 

Pump 

not working

Check that all connections are properly connected.

Check that the connection port cables are secure.

Water Not Flowing

Prime Pump as instructed. (Refer to priming the water pump)

Add Water

Check to see that pump tubes are connected

Check to see that the pump and pump tubes are clear of debris.

Loud Pump

Prime Pump as instructed. (Refer to priming the water pump).

Check water level. Ensure pump free of debris.

A/B/C/D Switch 

not working

Make sure fountain is plugged into a working power outlet.

Check that the connection port cables are secure. If secure disconnect Electrical Plug 

from the power outlet and reconnect.

Fountain Settings 

not working

Make sure fountain is plugged into a working power outlet.

Check that the connection port cables are secure. If secure disconnect Electrical Plug 

from the power outlet and reconnect to clear settings.

Troubleshooting Guide

PROBLEM

SOLUTION

Water Not Flowing

Check that all connections are properly connected.

Make sure fountain is plugged into a working power outlet.

Pump is on but no water flow: Check water level.

Pump is on but no water flow: Check pump is free of debris, kinks or obstructions. 

See Troubleshooting section.

Pump is on but no water flow: Check water tube is connected properly. See Base and 

Fountain Ball Installation Section 1.

Low Water Flow

Check that all connections are properly connected.

Make sure fountain is plugged into a working power outlet.

Pump has low water flow: Check water level.

Pump is on but low water flow: pump is cavitating. See Priming The Water Pump 

Section.

Loud Sound

Loud sound and weak flow: Air in pump: See Priming The Water Pump Section.

Loud sound and weak flow: Check pump is free of debris, kinks or obstructions. See 

Troubleshooting section. 

Содержание Calcata

























Отзывы: