Bernini Calcata, Руководство пользователя, Страница: 16 / 24

Remember if you need help contact Customer Care: 1+ (619) 449-2392 12|
Fill Your Fountain
Fill the Fountain Tier until water pours over the spouts. Then fill the Large Bowl
until the water is about 1 inch (2.5 centimeters) from the top of the bowl.
After you have filled your Fountain, grab both sides of the Large Bowl and
quickly shake your Fountain for ten seconds. This is to dislodge any air bubbles
that may be caught in your Water Pump. Press the C button once to turn your
Fountain on. Water should be flowing from the top of your fountain. If water is
not flowing, press the C button once more to turn your Fountain off, and repeat
the step above.
IF YOUR FOUNTAIN IS MAKING A LOUD NOISE, DON’T PANIC!
This just means that there are air bubbles stuck in the Water Pump. Your
pump will not be harmed and you can easily fix this issue. You can try priming
the Fountain again by repeating the steps above however, if the problem still
persists, refer to the “Priming The Water Pump” section of this manual for
instructions on how to prime the Water Pump.
Operating Your Fountain
The on-board control panel is located towards the top of the base, just below
the Large Bowl. See the diagram below to see how the all-new on-board con-
trols work for your Bernini™ Fountain.
Fountain Pattern
Control
Manual On/Off
Status Light
1-4 Hour Timer
This Feature Is
Not Used On
This Model.
BUTTON DESCRIPTION
A (Manual On/Off)
Turns the fountain on and off without any timer. Can be used when
extended run times are desired.
Note: Fountain will run until the battery loses its charge.