Remember if you need help contact Customer Care: 1+ (619) 449-2392
4|
Step 1:
Rest the Aria Fairy
Topper on the side of the Large
Bowl. Feed the water pump
cable (connector has a green-
stripe) down into the pipe in
the middle of the Large Bowl.
In the next step, you will
install the Aria Fairy Topper
onto the Large Bowl.
Step 2:
Firmly press the plug
into the pipe in the middle of
the Large Bowl to ensure a
water-tight seal.
NOTE: If you are having trouble pressing the plug into the pipe, you can rub a
small amount of soapy water on the plug to help it slide into place.
Installing The Aria Fairy Topper
Note: Be sure to leave approximately 6 to 7 inches (15 to 17 cm) of slack in the cord coming
from the Water Pump so the pump will sit on the bottom of the Large Bowl and can be
covered by water when the Fountain is assembled and running in later steps.
Step 3:
Like the Large Bowl and Base,
the Aria Fairy Topper uses a key-lock
system to connect to the Large Bowl. The
square notches in the groove of the Large
Bowl will align with the square gaps in the
bottom of the Aria Fairy Topper.
Step 4:
Align and connect the Aria Fairy
Topper to the Large Bowl.