Remember if you need help contact Customer Care: 1+ (619) 449-2392
16|
Cleaning The Water Pumps’ Parts (Continued)
Water Pump Impeller
The impeller inside of the water pump is what pushes water up through your fountain, allowing you
to enjoy the soothing sounds and wonderful sights of your Bernini™ Fountain. After long periods of
usage, this part will need to be cleaned to make sure your fountain runs optimally.
Step 1:
Remove the
front of the water
pump by grabbing the
sides of the front panel
and pull it off the unit.
Step 2:
Remove the
impeller chamber
cover. This is tightly
fitted on to the impeller
chamber, but will come
off.
Step 3:
Remove
the impeller from its
chamber.
Step 4:
Rinse the impeller
until all debris has been
removed. Then replace
the impeller in the impeller
chamber, put the impeller
chamber back on and
then replace the pump’s
front panel.
Begin by disconnecting the
pump from the fountain tier.
Step 1:
Remove the front of
the water pump by grabbing
the sides of the front panel and
pull it off the unit.
Step 2:
Pull the water pump
filter from the front panel.
Step 3:
Wash the filters under
running water until debris has
been removed. Then replace
the filters and pump’s front
cover.
Weighing Down Your Fountain
Do you happen to live in an area with strong winds? You can keep your
fountain standing strong by adding weight to the bottom chamber of the
base.
Simply add several scoops of sand to the chamber in the bottom of the base.
Even with sand added to the base, the battery can safely sit atop the platform
in the middle of the base’s chamber.