Bernina Overlocker Plus, Рабочая тетрадь

Страница: 9 / 26

9 7/01/16
BERNINA
Overlocker Workbook 2
Multi-Purpose Foot + Gathering
Fabric: Medium weight cotton, 3” x 18”
Medium weight cotton bias strip, 2” x 8”
12” length of ⅜” cotton filler cord
Needle: 80/12 Universal
Thread: 4 cones of overlocker thread
Presser Foot: Multi-Purpose Foot + Gathering Attachment
Stitch: 4-thread overlock
Set the overlocker for a 4-thread overlock. Adjust settings as
directed below.
Attach the Multi-Purpose Foot only (no guide), following the
directions in the instruction manual for the Multi-Purpose Foot
with Guide.
Slip the Gathering Attachment on to the fixing screw and metal
post directly behind the fixing screw.
Hint: Place the horseshoe
-shaped slot over the screw, then rotate the attachment to lock
over the metal post.
Tighten fixing screw. Note: 700D and
800DL also need the Attachment Base .
Wrap the bias strip around the cord and place the wrapped
cord in the groove under the foot with the raw edges to the
right.
Take 2 or 3 stitches into the fabric and lower the needles into
the fabric.
Place the 3” x 18” fabric
under the Gathering Attachment and
next to the needles.
Overlock, covering the cord, gathering the fabric strip and
seaming all layers together.
.
Suggested Settings
Others L 460/L 450
Upper Looper 3-5 3-5
Lower Looper 3-5 3-5
Left Needle 3-5 3-5
Right Needle 3-5 3-5
Stitch Length 2.5 2.5
Cutting Width 2-3 6
Differential Feed N 1