Happy Voyager
Positioning the Design in the Hoop/Creating Hoops 14
Round Type Hoops
Select
Class 1 ,
press
SET.
Press,
SET
to enter the
Size
area.
Change the number to represent the hoop size
you wish to use for a Round Hoop.
Press,
SET
to save your change and
ESC
to exit
the submenu.
Note: Remember the largest round hoop to fit the
HV machine is 210mm.
Rectangle Type Hoops
Select
Class 2 ,
press
SET.
Press,
SET
to enter the
Size Y
area.
C
hange the numbers to represent the height size
you wish for the hoop. Press
SET
to accept.
Press,
SET
to enter the
Size X
area.
Change the numbers to represent the Length size
you wish for the hoop. Press
SET
to accep
Note:
Equal values in the Y and X filed represent a
square hoop, uneven values represent a rectan-
gular hoop. Remember the largest Square hoop
to fit the HV machine is Y = 320mm and X =
320mm
Select
ESC
to exit the submenu.
Once the hoop is created. Select the hoop and
position the design in the hoop the same as de-
scribed earlier.
Содержание Happy Voyager
Страница 1: ...Happy Voyager Resource Manual...
