Bernina 790 PLUS, Руководство пользователя

Страница: 62 / 254

Setup Program
63
Programming the securing stitches
Embroidery motifs are programmed either with or without securing stitches. The machine recognizes when
no securing stitches are programmed and adds some. If securing stitches are not wanted, they can be
deactivated.
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Securing stitches on/off».
> Press the switch in the upper right section to deactivate the securing stitches at the start.
– If the embroidery motif has programmed securing stitches, they will be embroidered.
– If the embroidery motif doesn't have any programmed securing stitches, none are embroidered.
> Press the switch again to activate the securing stitches at the start.
– If the embroidery motif has programmed securing stitches, they will be embroidered.
– If the embroidery motif doesn't have any programmed securing stitches, the securing stitches are
added and will be embroidered.
> Press the switch in the lower right section to deactivate the securing stitches at the end.
– If the embroidery motif has programmed securing stitches, they will be embroidered.
– If the embroidery motif doesn't have any programmed securing stitches, none are embroidered.
> Press the switch again to activate the securing stitches at the end.
– If the embroidery motif has programmed securing stitches, they will be embroidered.
– If the embroidery motif doesn't have any programmed securing stitches, the securing stitches are
added and will be embroidered.
Adjusting the thread cut
The settings for the thread cut can be customized. Deactivate the thread cut after a color change (1) or
adjust the length of the connecting stitch (3). The machine does the cutting of the connecting threads at the
determined length for you. Please adjust the length first from where the connecting stitches are to be cut.
Then select the embroidery motif.
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Thread cut settings».
> Touch the switch in the upper portion of the display (1) to deactivate the automatic thread cut after the
thread has been changed.
> Touch the switch in the upper portion of the display (1) again to activate the automatic thread cut after
the thread has been changed.
> Touch the switch in the middle section of the display (2) so that the machine will stop after about 7
stitches and the remaining thread can be cut manually.