Stacking Yuno Tables on Ground
A lightweight entry level training table, Yuno is designed to stack without folding. This unique design aids in the practicality of storage by
allowing the table to be stacked on the ground with only two people and stacked on a cart by one person.
Stacking the Yuno table on the ground is a
two person
operation. Yuno table allows for a maximum of ten
tables stacked high.
Stacking Yuno Tables on Cart
Stacking the Yuno table on the ground is a two person operation while stacking Yuno tables on the
transportation cart is a
one person operation.
Storing Yuno Tables
Move the first table near the connecting table.
1
With two people, lift the table above the
table on the bottom, aligning the legs.
2
Slowly lower the table down and repeat. Tables will
stack a maximum of ten high.
Note: After tables are
stacked, tables should not be rolled.
3
When nesting the Yuno tables on the transportation cart, first set
the locking brakes on the cart. Next push the table legs until they
are tightly up against the cart or the receiving table.
1
Lift the opposite end of the table to match the receiving
table position. Push the table back to ensure the table
legs fit snug.
2
Fasten the tables with a strap and push the
cart to storage. Cart will hold a maximum of
ten tables.
3
storing tables
yuno electrical installation instructions
7
