Power Module Control Unit
Bernhardt design explores new ways to connect power with Interlink IQ’s Power Infeed. The power infeed allows the
user to connect up to (8) under mount power units off a single infeed. The power infeed was also created with smart
LED indicators that illuminate green when you’re connected and ready to plug in.
Modular Connector
Modular connector allows for the use of a specified whip, for longer extension, or the connection of multiple work surfaces on a single
power source. The jumper, for use with the power pantry, is 60” in length and requires the specification of a separate whip and
connector.
When connecting whips together make sure that you align the keys and arrows before pushing together the whip
connectors, this will ensure a safe and strong electrical connection.
Electrical Cord
The under mount power modules are provided with a grounded, SJT power cord. These products are for use only with a nominal 120
volt circuit and has a grounded plug as illustrated below. Make sure that these power modules are connected to an outlet having the
same configuration as the plug. No adapter should be used with these power modules.
Ganging Bracket
Yuno can be interlocked and aligned laterally without extra linking devices thanks to its interconnecting frame. This interlocking,
however, is not permanent and does not include leveling. Ganging brackets are an optional purchase for Yuno. This element levels out
table tops, lateral or cross linking
.
indicator
light
wire manager
SJT Power Cord
Hub
Arm
Keying
Locate the four pre-machined
screw holes for mounting the
ganging brackets.
Attach ganging brackets
using provided screws.
Push tables together, connecting
ganging brackets by rotating and
locking onto opposing hub.
Align keying and arrows
when connecting power.
electrical accessories
yuno electrical installation instructions
4
