BERNHARDT design traction, Инструкция по электромонтажу, Страница: 5 / 8

Power Module Control Unit
Bernhardt design explores new ways to connect power with Interlink IQ’s Power Infeed. The power infeed allows the user to connect up to
(8) under mount power modules or (4) surface mount power modules off a single infeed. The power infeed was also created with smart LED
indicators that illuminate green when you’re connected and ready to plug in.
Modular Connector
Modular connector allows for the use of a specified whip, for longer extension, or the connection of multiple work surfaces on a single power
source. The jumper, for use with the power pantry, is 60” in length and requires the specification of a separate whip and connector.
When
connecting whips together make sure that you align the keys and arrows before pushing together the whip connectors, this will
ensure a safe and strong electrical connection.
Electrical Cord
The dual under mount and surface mount power modules are both provided with a grounded, SJT power cord. These products are for use only
with a nominal 120 volt circuit and has a grounded plug as illustrated below. Make sure that these power modules are connected to an outlet
having the same configuration as the plug. No adapter should be used with these power modules.
Ganging Bracket
Ganging brackets are an optional purchase for Traction. This element levels out table tops, lateral or cross linking.
Close grey flap handle to pull tops
together.
Open Position
Lift grey handle to release top.
Closed Position
Indicator
Light
Wire Manager
SJT Power Cord
Keying
Align keying and arrows when
connecting power
.
3
electrical accessories
traction electrical installation instructions