8
EXPRESS RELIEF
© Bernhard and Company Limited
3.5
Bring the cutting unit onto the Express
Relief so that it’s rear roller is located in the
‘V’ support.
3.6
Position the adjustable clamps in the
slotted side supports so that they can
be attached to an appropriate (solid and
secure) part of the mower frame to secure
the cutting unit, starting at an angle of
approximately 45 degrees.
3.7
Alternatively, secure with a suitable bolt
directly through the side supports to the
cutting unit or (if necessary, use the spacer
bosses provided).
3.4
Lower the lift platform around 4” (100mm),
remove the locking pin and lower the
Express Relief to the horizontal position.
Raise the platform to it’s highest position
once more to support the Express Relief
frame.
