6
EXPRESS RELIEF
© Bernhard and Company Limited
2.4
If necessary assemble the support/pivot
shaft to the Express Relief chassis.
Locate the chassis over the shaft as
shown, with the end of the shaft flush with
the outer chassis boss.
Position the two adjustable collars
as shown and secure in position with
the grub screws, to prevent lateral
movement of the chassis on the support/
pivot shaft.
2.5
Place the Express Relief on the lift table platform as shown (ensure that the bolts securing
the support/pivot shaft to the bracket go into the detents in the shaft).
2.6
Position the support bracket so that
it is central on the side plate of the
lift table chassis.
2.7
Mark the hole positions, using the
support bracket as a template.
Drill 8.5mm & Tap M10 (using the
drill and tap supplied).
Securely bolt the Express Relief to
the machine.
