Bernhard ANGLEMASTER 3000DX, Руководство пользователя/Инструкция по эксплуатации

Страница: 13 / 43

13
ANGLEMASTER • AM3000DX
© Bernhard and Company Limited
3.4
Applying a cut
The Bedknife blade is adjusted parallel to the grinding access
The mounting bar is paralleled by drawing the mounting bar / bedknife assembly towards
the grinding stone, by means of the two handwheels
Once the bedknife has been set, the cut is applied via the single point feed handwheel on
the grinding head/carriage.
Handwheels must be moved equal amounts. If one is moved considerably more than the
other (during set up for instance) mounting bar misalignment could result in the slide block/
feed screws jamming.
3.5
Grinding stone dressing
A diamond dresser is supplied, fitted to the grinding head.
The grinding stone should be dressed periodically,
by adjusting the dresser towards the stone, then
rotating the control knob back and forth making a
few light passes of the dresser, to ensure that the
stone does not become “loaded” (clogged). New
stones should ALWAYS be dressed!
There is no necessity to alter the set up to do this.
The cut can simply be taken off with the single point
feed handwheel and the stone can be dressed mid
way through a grind, if necessary.
Ensure that adequate eye / breathing protection is used.
3. Setting Up
(Continued)