5. Position the fabric so that the needle is
2mm (1/16 inch) in front of the area to be
darned, and then lower the presser foot
lever.
When lowering the
presser foot, do not push in the front
of the presser foot, otherwise the
darning will not be sewn with the
correct size.
Please Note:
6. Pass the upper thread down through the
hole in the presser foot. Pull down the
buttonhole lever. The buttonhole lever is
positioned behind the bracket on the
buttonhole foot. Gently hold the end of the
upper thread in your left hand, and then
start sewing.
Please Note:
When you select any
buttonhole pattern or darning pattern,
LCD screen will be demonstrated the
figure " ", it is to remind you to lower
the buttonhole lever.
6
PUS
H
8. If the sewing range is too big to sew, then
we suggest you can sew several times (or
cross sew) to get better sewing result.
7
2mm
5
7. Darning stitches are sewn from the front
of the presser foot to the back, as shown.
8
41
DARNING STITCH
