8
STARTING SEWING
Attention:
Consult a qualified electrician if in doubt as how to connect the machine to the
power source. Unplug the power cord when the machine is not in use.
The appliance must be used with the foot controller C-9000.
With the sewing machine turned off, insert the foot
control plug into its connector on the sewing
machine.
Turn on the sewing machine, and then slowly
depress the foot control to start sewing.
Release the foot control to stop the sewing machine.
Foot control
ADJUSTING PRESSER FOOT PRESSURE
Standard presser foot pressure set at "2".
The presser foot pressure of the machine has been
pre-set and no need for change unless sewing
particular type of fabric (light-or-heavy weight).
If you do need to adjust the presser foot pressure,
turn the presser adjusting screw by ones finger.
For sewing very thin fabric, loosen the pressure
by turning the screw counterclockwise to move
the screw upward and the pressure decreased. If
kept turning the screw, it could be take out. By
that time, just turn the screw clockwise, it could be
locked back and readjust the pressure.
For heavy fabric, tighten the pressure by turning
the screw clockwise to move the screw downward
and the pressure increased. Once screw could not
be moved any further, it has been reached the
bottom, pls do not turn any more.
