Bernette b48 Скачать руководство пользователя страница 66

Страница: 66 / 77

PLEASE NOTE:

Presser foot has been removed to show detail.

• Inside Corner

–

Cut inside corner up to seam line

(1)

as shown.

–

Sew along seam line.

–

Sew up to end of fold. (Leave needle in fabric)

• Pin Placement

–

Insert pins to the left of the presser foot. The
pins will be easy to remove and are away from
the cutting action of the knives.

–

Turn the fabric and lower the presser foot so
that the upper knife is positioned in line with the
cut edge.

–

Pull slack threads up, then start to sew.

CAUTION:

Sewing over pins will damage and /or destroy
the cutting edge of the knives.

• Securing The Thread Chain

–

Thread a large eye, hand sewing needle (such
as a tapestry needle) with the thread chain.

–

Pull the thread chain into the overlock stitches
or between two layers of fabric.

–

Raise presser foot. (Leave needle in fabric)

–

Spread fold and re-fold so that seam line is
straight

Содержание b48














































































Результаты поиска

Содержание b48

Отзывы:

Бренды по названию

Популярные бренды

Bernette b48, Инструкция по эксплуатации

Результаты поиска

Содержание b48

Отзывы:

Бренды по названию

Популярные бренды