28
Threading the Overlock Left Needle
(Yellow)
(A On Needle Clamp)
–
Continue to thread points
(4)
–(
10)
.
–
Raise the presser foot to open the tension
discs.
–
Thread the left needle as indicated
(1)
–(
10)
.
–
The position of the thread must be behind the
thread guide.
–
Draw about 10 cm (4 inches) of thread through
needle eye towards the rear of machine.
–
Place the thread to the back, under the presser
foot.
Before threading eye of needle, slip thread behind
thread guide
(9)
located on the bottom of the needle
holder.
–
Thread the eye of the right needle
(10)
.
1
2
2
3
6
7
8
9
5
4
10
3
8
4
5
7
6
3
2
9
10
1
1
2
2
10
9
8
4
5
7
6
3
2
9
10
1
1
2
2
10
9
8
4
5
7
6
3
2
9
10
1
1
2
2
10
9
CAUTION:
Be sure to turn off power switch.
PLEASE NOTE:
Slip the thread into the rear slot on the thread
guide
(5)
and into the slot on the take-up lever
cover
(6)
. Then slip the thread into the right slot
on the thread guides
(7)
and
(8)
.
PLEASE NOTE:
Use of tweezers in the looper cover will make
needle eye threading easy.
–
Pass thread from back to the front through the
thread guide
(1)
.
