Berner BHWKTD3.5, Руководство пользователя, Страница: 6 / 44

Page 5 Of 44 17.07.2014
Ver. 3.6 © Bernese cooking systems 2018
-
To avoid overheating of the pans by empty cooking, do not heat the pan unattended and
without cooking.
-
Turn off the heating zone if you take the pan away for a while. This prevents the heating
process from automatically start when a pan is placed back on the heating zone. Thus,
unattended heating is avoided, i.e. a person who wants to use the inductiongerät must start
the heating process by switching on the device or by turning the power controller to 'ON'.
-
Do not use the cooking surface as a shelf!
-
Do not place paper, cardboard, fabric etc. between the pan and ceramic field as it could
ignite. Aluminium foils and plastic vessels must not be placed on the hot surfaces.
-
Care must be taken to ensure that during the operation of the device, items worn by the
user, such as.B rings, watches, etc., can become hot when they come close to the cooking
level.
-
After use, the hot plate must be switched off by means of its control and/or control device.
Do not rely on pot detection.
-
Do not place credit cards, phone cards, cassettes or other magnetic-sensitive items on the
ceramic field.
-
Only recommended types and sizes of vessels may be used.
-
The inductiongerät has an internal air cooling system. Avoid obstructing the air supply and air
outlet zone with objects (e.B. fabric). This would cause overheating and therefore the device's
shutdown.
-
Avoid the entry of liquids into the device and overflow water or cooking material over the
edge of the pan. Do not clean the device with a water jet.
Improper operation
The functionality of the inductiongerätit can only be guaranteed if used correctly. The limit
values in accordance with the technical data may not be exceeded or exceeded under any
circumstances.
Changes / use of spare parts
Contact the manufacturer if you intend to make changes to the device. To ensure safety, use
only original spare parts and accessories approved by the manufacturer. When using non-
original components, all liability for follow-up costs expires. When disassembly, testing or
repairs, pay attention to the stability of the device.
Attention! When replacing spare parts, the induction device must be "visibly tt" from the
power supply.