Application tool
Material
Application
Scraper, flex-
ible
Carpet adhesive,
paint residue, silic-
one
Flexible scraping on a soft surface;
example: Removing silicone joints, carpet ad-
hesive residue and paint residue
Bi-metal seg-
ment serrated
blade
Insulation material,
insulation boards,
floor panels, impact
sound insulation
boards, cardboard,
carpets, rubber,
leather
Precise cutting of soft materials;
example: Cutting insulation boards to size, cut-
ting protruding insulation material to length so
that it is flush with the surface
TC-Riff sanding
finger
Wood, paint
Sanding of wood or paint in hard-to-reach
areas without sanding paper;
example: Sanding off paint between window
shutter slats, sanding wooden flooring in
corners
TC-Riff plunge
cut saw blade
Fibreglass, mortar,
wood
Plunge cuts in extremely abrasive materials;
example: Routing of thin mosaic tiles
HCS universal
joint cutter
Expansion joints,
window putty, insula-
tion materials (rock
wool)
Cutting soft materials;
example: Cutting silicone expansion joints or
window putty
Bi-metal plunge
cut saw blade
for wood and
metal
Softwood, hard-
wood, veneered
boards, plastic-
coated boards, non-
hardened nails and
screws
Fast, deep plunge cuts in wood and metal;
example: Fast cutting of wood containing nails,
deep plunge cuts in laminated boards and pre-
cise shortening of door frames
Bi-metal plunge
cut saw blade
for wood and
metal
Wood, abrasive
wood-based materi-
als, plastics,
hardened nails and
screws, non-ferrous
metal pipes
Fast, deep plunge cuts in wood, abrasive
wood-based materials and plastics;
example: Fast cutting of non-ferrous metal
pipes and profiles with small dimensions, easy
cutting of non-hardened nails, screws and
steel profiles with small dimensions
TC plunge cut
saw blade,
metal
Stainless steel,
screws and nails,
epoxy resin, fibre-
glass-reinforced
plastics, fibreglass,
plasterboard, porous
concrete
Fast, deep plunge cuts in severely abrasive
materials or metal;
example: Fast cutting of kitchen front covers,
easy cutting through hardened screws, nails
and stainless steel.
HCS plunge
cut saw blade
for wood
Softwood, dowels,
pins, furniture ele-
ments
Fast, deep separating cuts and plunge cuts;
including sawing close to edges in corners and
in difficult-to-reach areas;
example: Deep plunge cut in softwood for in-
stalling a ventilation grille
Fitting/changing the application tool
English
Remove the application tool if one has already
been fitted.
To do so, open the SDS lever
(4)
all the way. The
application tool/accessory will be ejected.
Position the required application tool (e.g. plunge
cut saw blade
(9)
) on the tool holder
(5)
so that
the depressed centre is facing downwards (see
figure on the graphics page, text on the applica-
tion tool should be legible from above).
When doing so, place the application tool/access-
ory in a position which is convenient for the job at
hand. Twelve positions offset by 30° are possible
for this.
1 609 92A 4DC • 13.12.18
English
| 21
