Berner 040745, Оригинальное руководство пользователя

Страница: 12 / 117

Technical data
English
Screwdriver BSD-HD-1 BSD-S-1
Article number 040745 040749
Rated power input W 701 701
Max. power output W 327 327
No-load speed min
-1
0–2500 0–4500
Rated speed min
-1
0–1700 0–3000
Tool holder ¼" internal hexagon ¼" internal hexagon
Max. screw diameter mm 6 6
Weight according to
EPTA-Procedure 01:2014
kg 1.5 1.4
Protection class
/ II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/Vibration Information
English
BSD-HD-1 BSD-S-1
Noise emission values determined according to EN 62841-2-2 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection
dB(A)
dB(A)
dB 81
92
3
79
90
3
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to EN 62841-2-2 :
Screwdriving:
a
h
K
m/s 2
m/s 2
< 2.5
1.5 < 2.5
1.5
The vibration level and noise emission value given
in these instructions have been measured in ac-
cordance with a standardised measuring proced-
ure and may be used to compare power tools.
They may also be used for a preliminary estima-
tion of vibration and noise emissions.
The stated vibration level and noise emission
value represent the main applications of the
power tool. However, if the power tool is used for
other applications, with different application tools
or is poorly maintained, the vibration level and
noise emission value may differ. This may signific-
antly increase the vibration and noise emissions
over the total working period.
To estimate vibration and noise emissions accur-
ately, the times when the tool is switched off or
when it is running but not actually being used
should also be taken into account. This may signi-
ficantly reduce vibration and noise emissions over
the total working period.
Implement additional safety measures to protect
the operator from the effects of vibration, such as
servicing the power tool and application tools,
keeping their hands warm, and organising work-
flows correctly.
Assembly
English
u
Pull the plug out of the socket before carry-
ing out any work on the power tool.
Changing the Tool (see figure A)
English
Pull the depth stop (4) off towards you. Pull the
screwdriver bit (1) out. If required, the universal
bit holder (10) can also be pulled out and re-
placed.
After changing the tool, reattach the depth stop .
Operation
English
Starting Operation
English
u
Pay attention to the mains voltage. The
voltage of the power source must match the
12 | English
1 609 92A 53N • 15.4.19