6
AUTO MODEL - Setting the auto feeding cycle
• Turn the power button on. The feeder will automatically start as if it is
dispensing food for the first time and the lights will illuminate on the
display panel.
• Press "TIMER" button repeatedly until the blue light above Meal 1 is
illuminated.
• Now press the "PORTION" button to set how much food will be dispensed
during Meal 1. Press the buttons repeatedly until the red light illuminates
above the portion size you require.
NOTE:
If you do not want any food to be dispensed during this Meal, press
the "PORTION" button repeatedly until no red lights are illuminated.
• To set Meal 2, press TIMER button until the blue light above Meal 2 is
illuminated. Then press PORTION button until the red light above the
correct portion is illuminated.
• Continue this sequence until all four meals have been set.
• The feeder automatically saves the current settings after 3 seconds of
inactivity.
NOTE:
If you turn the power switch off at any point, the cycle will be re-set
from the next time you turn it back on.
NOTE:
If you press the FEED button at any point, the feeder will dispense 1
portion of food. This will not affect the Auto feeding cycle program.
NOTE:
You can easily modify the portion sizes for each meal at any point.
After 3 seconds of inactivity the program will revert back to where it left off.
