Draft version 01 Operatots Manual / SmartMonitor SITE L
page 18 of 26
13.4.1
Assess state of goods and information
User has the possibility to asset state of the monitoring and get information on the device display by
pressing the multifunctional button once .
13.5
Stop
SmartMonitor SITE L device can only be stopped via Berlinger SmartView software (version 6.0 and
later).
As soon as the stop command has been entered via SmartView, the device will be stopped during the
next synchronization between SmartView and SITE L and the information DONE will be shown on the
7-segment display on the device.
13.5.1
Read out
As soon as the device becomes the stop command via SmartView, it automatically sends the
remaining data to Berlinger SmartView software (version 6.0 and higher).
If an automatic upload is not possible, the two icons Bluetooth and USB flash. In this case, the
readout of the measurement data can be done manually via USB.
•
Reading out via USB:
Connect the device to a computer via USB-C connector, the device will immediately start
downloading the data to your computer.
•
Readout via Bluetooth:
Reading out via Bluetooth will only be possible with a later version.
13.5.2
Upload data manually of read out data to Berlinger SmartView software (version
6.0 and higher).
To upload the manually read out data to Berlinger SmartView software (version 6.0 and higher) you
have two possibilities:
•
Direct upload to Berlinger SmartView software (version 6.0 and higher):
Open Berlinger SmartView software (version 6.0 and higher), chose Device
→
Upload Data
File
→
Select the datafile to upload
→
confirm it by pressing Upload File(s)
•
Via e-mail:
Send the read out datafile via e-mail to [email protected]
13.5.3
Return device
If monitoring is complete and the data are uploaded to Berlinger SmartView software
(version 6.0 and higher), the device can be used for the next operation.
Before the device will be used for the next operation, follow the instruction at chapter
Maintenance.
If the unit was rented from Berlinger, return it to Berlinger in accordance with the RMA
process.
