berlinger Fridge-tag 2, Руководство пользователя

Страница: 15 / 121

USER MANUAL Fridge-tag 2 | 2 E Page 15 www.berlinger.com
5.7. Setting the alarm limits
(not standard, only if preset by factory)
The 1st digit of the duration of the
alarm limit is flashing.
Press READ to adjust the
number.
Press SET to
confirm the number.
1. and 3. Setting the HI and LO alarm durations, they are
completed in the same manner
This adjustment is done in 4 steps:
1. Setting the duration of the upper alarm limit
2. Setting the temperature of the upper alarm limit
3. Setting the duration of the lower alarm limit
4. Setting the temperature of the lower alarm limit
Temperature (min/max)
< 8°C
(15min)
> 25°C
(15min)
0123456789012
-27d -25d -23d -21d -19d -17d -15d -13d -1
1d
-9d -7d -5d -3d yesterd. -29d -
28d
-26d -24d -22d -20d -18d -16d -14d -12d -10d -8d -6d -4d -2d today
Time / Alarm duration Alarm state
= OK
= ALARM
Fridge-tag
®
dd.mm.yyyy
1 H d r u
0 00 1
1
2
The 2nd digit of the duration of
the alarm limit is flashing.
Press READ to adjust the
number.
Temperature (min/max)
< 8°C
(15min)
> 25°C
(15min)
0123456789012
-27d -25d -23d -21d -19d -17d -15d -13d -1
1d
-9d -7d -5d -3d yesterd. -29d -
28d
-26d -24d -22d -20d -18d -16d -14d -12d -10d -8d -6d -4d -2d today
Time / Alarm duration Alarm state
= OK
= ALARM
Fridge-tag
®
dd.mm.yyyy
1 H d r u
0 00 2
1
2
Press SET to
confirm the number.
Note
: If the device is configured with self-programmable alarm
limits, proceed with the following chapter (5.7.).
As soon as the last digit of the time setting is confirmed, the
activation is completed.
Internal sensor
: Now place the Fridge-tag according to chapter
4.
External sensor
: Connect the device with the external sensor.
During max. 1 minute after activation no temperature is dis -
played on the screen.
ENGLISH